Home / Marks and hallmarks
Roseville pottery marks by period
Roseville pottery marks range from early ink stamps, paper labels, and blue underglaze Rv signatures to impressed script and the familiar raised Roseville U.S.A. mark. No single mark proves age or authenticity. Date the mark as a working range, then confirm that the pattern, shape number, glaze, handles, rim, and base belong together.
Looking at shape and material...
While you wait: the TIQ app gives more accurate results, keeps your scan history and runs a reverse image search for similar items.

The chronology has fuzzy edges. Collector references disagree about some transition dates, especially the adoption of raised script, and Roseville did not mark every piece consistently. An unmarked vase may be genuine; a vase with convincing raised lettering may still be a reproduction.
Roseville mark timeline
Roseville used several marking systems, sometimes at the same time. The table below gives useful working ranges, not exact cutoffs for every line or mold.
| Approximate period | Mark or label | What to look for | Main caution |
|---|---|---|---|
| Early production | Unmarked, ink-stamped, paper-labeled, impressed, or Rozane wafer/seal | Roseville Pottery ink formats and early factory labels vary | Marks were not applied consistently |
| Mid-to-late 1910s through 1920s | Blue underglaze script Rv | Blue R and v joined in a flowing signature beneath the glaze | References place its common use anywhere from about 1910 to 1928, with one dating its start near 1923 |
| About 1926 to 1927 | Small triangular black paper label | Associated with lines including Futura and Imperial II | Original labels are often missing; labels can also be moved |
| About 1930 into the 1930s | Silver or gold foil label | Seen on Blackberry, Tourmaline, and some early Pine Cone pieces | Wear, adhesive residue, and replacement labels complicate identification |
| Roughly 1932 to 1937 | Impressed or sunken Roseville script | Indented lettering formed in the body; some marks omit U.S.A. | Another chronology places die-impressed marks with numbers around 1936 |
| About 1935 or 1937 through 1954 | Raised Roseville U.S.A. script with number | Molded lettering and a shape-size designation such as 728-10 | Published starting dates differ, and reproductions copy this format |
The disagreement over dates is real. Some references put the raised mark near 1935, others around 1937, and some date broad use to approximately 1940. A mark that falls near a transition needs support from the documented production period of the pattern.
For comparison with the terminology used on other ceramics, see the guide to pottery marks and backstamps. Roseville lettering is a maker's mark; it is not a hallmark in the precious-metal sense. The distinction is covered in maker marks versus hallmarks.
What each Roseville mark looks like
Early ink stamps, seals, and unmarked bases
Early Roseville is the least tidy period for mark identification. A piece may have an ink stamp reading Roseville Pottery, a paper label, an impressed mark, a Rozane wafer or seal, or no surviving mark. Ink color, wording, and layout were not fully consistent.
Do not reject an early-looking piece simply because its base is blank. Check the clay body at the foot, the glaze, decoration method, handle construction, rim, and known shapes. A generic floral vase with no mark is still only an unattributed vase until those details match a documented Roseville form.
The blue underglaze Rv
The script Rv mark is blue and normally lies under the glaze. It should look integrated with the finished surface, not like a removable transfer or fresh surface print. Lines reported with Rv marks include Carnelian I, Rosecraft Panel, Rosecraft Vintage, Rosecraft Hexagon, and Mostique.
The date cannot be read from Rv alone. Sources give a broad span from about 1910 to 1928, while another chronology puts the beginning near 1923. Use the pattern's introduction date and exact form to narrow the range.
Triangular paper and metallic foil labels
The small triangular black label is usually placed around 1926 to 1927 and is associated with Futura and Imperial II. Silver and gold foil labels began appearing around 1930 and continued for several years. Roseville from roughly 1927 to 1935 may have only a label, sometimes with a shape-and-size number.
Labels disappear during washing, handling, and decades of display. A clean rectangular or triangular patch on a dusty base may show where one sat, though that patch cannot identify the maker by itself. A surviving label helps only when its typography, material, aging, and placement agree with the pot.
Impressed and raised script
Impressed script sinks into the clay. Roseville added this indented mark to molds for new lines during part of the 1930s, probably about 1932 to 1937; some references start numbered die-impressed marks closer to 1936. It may say Roseville without U.S.A.
The better-known later mark is molded in relief: Roseville U.S.A., generally with a number below or beside it. Pine Cone, Foxglove, Magnolia, Bleeding Heart, and Snowberry are among the later patterns often found with raised marks. The lettering came from the mold, so it should share the base's glaze, wear, and surface character.
How to identify a marked piece
Start with the whole pot and use the mark as supporting evidence. This order prevents the most common mistake: finding plausible lettering and forcing every other detail to fit.
- Photograph the front, both sides, base, rim, handles, and any damage. Use indirect light so raised or indented lettering casts a small shadow.
- Decide how the mark was made. Is it underglaze blue, ink on the surface, paper or foil, indented into the body, or raised from the mold?
- Read every character. Record Roseville, U.S.A., Rv, and the full number exactly, including the hyphen.
- Identify the pattern from its molded decoration and glaze. Then compare the exact silhouette, rim, foot, handles, and proportions with documented examples.
- Check whether that pattern was produced during the period in which the mark type was used.
- Match the mold number and size designation to the form. A correct Roseville-style number attached to the wrong body is a warning.
- Inspect condition after identification. Hairlines can hide beneath a rim, and restoration is often easier to see under ultraviolet light or magnification.
A general maker-mark identification method can help when lettering is faint or partly glazed over. If the pattern is still uncertain, compare complete-object photos as described in the guide to identifying antiques from photographs.
TIQ, an antique identifier app for iPhone, can examine a full-object photo and a separate base image for era, origin, mark, and reproduction clues. On Android, the team's Lens app can give a rough antique appraisal from photographs. These are educational estimates; neither is certified authentication.
Reading Roseville shape and size numbers
Roseville's later numbers usually combine a mold, shape, or form number with a size designation separated by a hyphen. The first number is not normally the pattern name.
| Example | How it is read | Known association |
|---|---|---|
| 728-10 | Shape or mold 728, 10-inch size designation | Silhouette line |
| 991-12 | Shape or mold 991, 12-inch size designation | White Rose line |
On a vase, the number after the hyphen often approximates the height in inches. Do not demand an exact tape-measure match. Manufacturing variation, the way a form was nominally sized, and the use of related form-size designations mean that a piece marked 10 may not measure exactly 10 inches.
Numbers appeared most often as part of in-mold marks on later wares, especially after the mid-1930s. To verify one, compare four things: the complete designation, pattern, body profile, and handle arrangement. A 728-10 number on a shape unlike documented Silhouette 728-10 examples is stronger evidence of trouble than attractive glaze is evidence of authenticity.
Photograph numbers with light coming from the side. Raking light often reveals a shallow 1, 7, or hyphen that vanishes under direct overhead lighting. Do not chalk, pencil, or rub pigment into the mark; residue can lodge in porous unglazed clay.
Fake marks and reproduction warning signs
Reproductions often copy the raised Roseville U.S.A. mark because buyers recognize it. Lettering alone cannot authenticate the pot, even when the spelling and number format look right.
- The mark type conflicts with the claimed date. An alleged early line carrying a later raised U.S.A. mark needs close research.
- The listed mold number belongs to a different shape, size, or handle configuration.
- The mark is unnaturally crisp while the surrounding foot has heavy wear, staining, or glaze loss.
- Glaze sits oddly around the lettering, or abrasion suggests that a surface mark was added or altered.
- A supposed underglaze Rv appears to sit on top of the glaze and can be felt as a surface print.
- The decoration resembles a known pattern, yet the rim profile, foot, proportions, or handles do not match documented forms.
- A paper or foil label looks much newer than the base, has suspect adhesive, or covers an area that prevents inspection.
Some genuine molded marks are soft because the mold was worn or glaze pooled over the letters. Some genuine bases also look unexpectedly clean. Those traits call for more comparison; neither gives a verdict alone.
Look hard at the object before searching the wording. Reproduction pottery can have heavy, clumsy handles, distorted relief, blunt leaf edges, or proportions absent from known originals. Color is less decisive than beginners expect because photography, firing variation, and screen settings alter it.
There is no published manufacturer or museum master list covering every authentic Roseville variation, nor a single visual test that catches every modern copy. Exact form comparison remains the best starting point. Reference sources useful for this work include the Wisconsin Pottery Association, The Mark Index, and Roseville Pottery.
Labels, missing marks, and other beginner traps
A missing label is normal on pottery that has been handled for decades. Calling a piece fake because its foil label is gone discards many possible originals; accepting it because a foil triangle survives is equally risky.
Common errors include:
- Assuming every raised Roseville U.S.A. mark is genuine.
- Rejecting all unmarked pieces without checking form, glaze, and decoration.
- Reading the first number as the pattern name.
- Treating the dash number as an exact physical measurement in every case.
- Assigning an exact year from a chronology whose transition dates are disputed.
- Identifying a pattern by flowers or leaves while ignoring the handles, rim, and base.
- Using old or rare as an attribution when no documented shape comparison has been made.
Also watch for unrelated pottery with an added Roseville-style label. The label and pot should age together. Old adhesive discoloration can support a label's history, though adhesive can be imitated and genuine loose labels can be transferred.
Do not aggressively clean a base to expose a weak stamp. Water may damage paper labels, and household cleaners can change an unglazed foot or leave residue. Start with dry photographs and a soft brush used away from any label. More general advice for new buyers appears in the beginner's antique collecting guide.
What the mark tells you about value
A Roseville mark helps attribution, but pattern, form, condition, size, colorway, and provenance have more influence on collector interest than the mere presence of lettering. A scarce shape within a familiar line may attract more attention than a common vase carrying a sharp raised mark.
Check for chips at high points and feet, hairline cracks, staining, glaze damage, restoration, missing lids, and replaced components. Examine handles where they join the body. Repairs in those areas can be difficult to spot in a front-facing listing photo.
An intact original label may strengthen attribution. It does not erase condition problems, and it should not be assigned a fixed premium without comparing the complete piece. Likewise, an unmarked example can retain collector interest when its pattern and shape are well documented.
For a value estimate, find recent sold examples with the same pattern, shape number, size, colorway, and similar condition. Asking prices show what sellers hope to receive, not what buyers paid. The guide to researching an antique's value explains how to compare sold listings and when a specialist appraisal is warranted.
Save photographs of the base, mark, full profile, damage, and measurements with your notes. If you later sell or insure the piece, that record is more useful than a cropped photograph of Roseville U.S.A. by itself.
Questions people ask
Are all Roseville pottery pieces marked?
No. Early Roseville can be unmarked, and paper or foil labels often disappeared through wear or washing. Identification then depends on matching the pattern, form, glaze, handles, rim, and base.
When did Roseville start using the raised U.S.A. mark?
Published chronologies place its introduction around 1935, 1937, or broader use near 1940. Treat those as working ranges and check whether the mark agrees with the pattern's production period.
What does the number on the bottom of Roseville pottery mean?
It usually combines a mold or form number with a size designation after a hyphen. On vases the second number often approximates inches, though it is not always an exact measured height.
Does a blue Rv mark mean Roseville pottery is authentic?
A blue underglaze Rv is associated with several Roseville lines from the 1910s and 1920s, but the mark alone is insufficient. Its placement beneath the glaze, pattern, exact form, and construction must agree.
Can fake Roseville pottery have a raised Roseville U.S.A. mark?
Yes. Reproductions can copy the raised script and number format, so compare the number, silhouette, handles, rim, molded decoration, glaze, and base with documented originals.
Should I remove an old Roseville foil label to inspect the base?
No. Leave an apparently original label in place and photograph around it, since removal can damage both the label and its attribution value.